Important Note - This product is the Perma Salt Control box only and does not include chemicals. For the complete line of Perma Salt products and Chemicals Click Here
Family Leisure created, patented and exclusively offers you the Perma Salt System for your home siwmming pool. The Perma Salt purification system serves to change the way you enjoy swimming pool water. Instead of chemical-laden water that requires constant attention, we invite you to enjoy a nature-based water purification process. The Perma Salt System employs nature's finest minerals and processes so that fewer chemicals and maintenance goes into your swimming pool. No other non-chlorine system works like Perma Salt. Review the mineral processes and easy start-up measures below.
Is not a Salt Generator
Does Not Convert Salt into Chlorine
Is a Natural Synergy Approach to Water Purity
Simplifies Pool Ownership and Maintenance
Only Requires Adding Chemicals Every 2 Weeks
Soft on Skin, Hair, Eyes and Swimsuits
Has .002ppm less salt than a tear
More Cost Effective than any other non-chlorine system - Guaranteed
Part of the Family Leisure "Algae Free Guarantee Program"
DEMO VIDEO (1 of 2)
Preparate: Preparate is Part 1 of a 3 Part Perma Salt Chemical System. It is the initial water treatment to prepare the water for the Perma Salt System. Preparate is a sodium based salt that is enhanced with not only borates, but also mineral removers and cyanuric acid. The salt provides a medium through which the Perma Salt minerals may be dispersed. Borates, as a water prep, removes carbon dioxide from the water. All plant based life forms such as algae, require carbon to live. By removing the carbon dioxide, algae cannot grow while the mineral levels are coming up to the desired levels. The mineral remover eliminates counterproductive minerals found in the normal water supply. By eliminating these interfering minerals, the natural minerals produced by the Perma Salt Chamber will be more effective. The cyanuric acid, which works in conjunction with Initiate & Reactivate, prevents chlorine loss due to sunlight. Preparate is the initial water preparation treatment, and is a once a year treatment.
Initiate & Reactivate: Initiate & Reactivate is a combination of DiChlor and Oxone. These two products are the most popular shock treatments available on the market. Initiate & Reactivate is the only shock that actually blends these two products for their maximum effectiveness. DiChlor is a very strong, fast acting, but short lived bacteria-stat. By only adding it every 2 weeks, all of the side effects of chlorine use are eliminated. The oxone is an extremely powerful oxidizing agent that strips away chloramines and other contaminants killed by the DiChlor. This blend of DiChlor and Oxone is so effective and powerful, it is only necessary every 2 weeks.
Klairate:Klairate is an enzyme based water clarifier. Enzymes attack and eliminate oils and other contaminants in the water to maintain that perfect HD water clarity. The most common cause of water cloudiness and scum lines on pools is oils, usually from sun blocks and sun tan lotions. The enzyme based Klairate, eats these oils to keep the water's HD clarity.
*The Perma Salt Chamber must be replaced usually once a year. The service light will come on to indicate that it is time to change the chamber. The Preparate is a once a year treatment, however, it can also be used as a winterizing treatment as well. The Perma Salt System, by a combination of synergistic technologies, is the only cost effective, every 2 week program with an algae free guarantee on the market today.
The total dissolved solids (TDS) of the water must be at a minimum of 1000 ppm in order for the copper to reach optimal levels. This is done by adding the 25# bucket of Preparate and 1 bag of each of Initiate & Reactivate. If your TDS levels do not reach 1000ppm contact your Local Family Leisure for options on raising your TDS.
Test for copper levels. Your copper level should be maintained between .3 and .5 ppm. Adjust the output levels by turning the control knob up or down. It may take a few days for your copper levels to reach the desired levels.
Every 2 Weeks
Add 1 bottle of Klairate & 1 Bag of Initiate & 1 Bag Reactivate (2 Bags of each for 30' pools or larger)
Regulate copper levels by adjusting dial on the Perma Salt System
Test and adjust pH and Alkalinity as needed
Optimal levels for properly balanced Perma Salt water
pH 7.2 - 7.8
Total Alkalinity 80-140ppm
Calcium Hardness 200-350ppm
Total Dissolved Solids (TDS) 1000ppm minimum
NOTE:Customers using well water with the Perma Salt System should not use an iron remover. This will counteract with the the copper ions that the Perma Salt System is generating.
For online orders over $40 (before tax), shipping and handling is FREE. Orders that are under $40 will have a $5.99 shipping fee added. Most pool supplies ship via Fed Ex and delivery times within the Continental U.S range from 2-5 days. All orders received before noon will ship that SAME DAY. Shipping Details & Conditions.
People Also Buy
Looking for a price quote or have a question? Let us know here, and we'll call or email you back shortly. Be sure to include any details, including the quantity or specific options you are interested in.
Ready To See More?
Visit our YouTube channel to see more, or stop in to our nearest location. We're here to make the buying experience simple, hassle-free and worry-free – from selection to installation.