Replacement Chamber for Perma Salt System by Family Leisure
The Perma Salt System uses a natural synergy for a holistic approach to water maintenance. First, the System Chamber disperses natural minerals into the water, such as copper and silver, which serves as natural algaecides. By simply adjusting the dial, these natural mineral levels can be adjusted and maintained to their ideal levels. In addition, these natural minerals are complemented by a family of ancillary products. The Perma Salt Chamber is an important component of the natural purification process. The Replacement Chamber must be replaced usually once a year. When the service light illuminates, this indicates that it is time to change the chamber with a Replacement Chamber.
- Is not a Salt Generator
- Does Not Convert Salt into Chlorine
- Is a Natural Synergy Approach to Water Purity
- Simplifies Pool Ownership and Maintenance
- Only Requires Adding Chemicals Every 2 Weeks
- Soft on Skin, Hair, Eyes and Swimsuits
- Has .002ppm less salt than a tear
- More Cost Effective than any other non-chlorine system - Guaranteed
- Part of the Family Leisure "Algae Free Guarantee Program"
Preperate: Preperate is Part 1 of a 3 Part Perma Salt Chemical System. It is the initial water treatment to prepare the water for the Perma Salt System. Preparate is a sodium based salt that is enhanced with not only borates, but also mineral removers and cyanuric acid. The salt provides a medium through which the Perma Salt minerals may be dispersed. Borates, as a water prep, removes carbon dioxide from the water. All plant based life forms such as algae, require carbon to live. By removing the carbon dioxide, algae cannot grow while the mineral levels are coming up to the desired levels. The mineral remover eliminates counterproductive minerals found in the normal water supply. By eliminating these interfering minerals, the natural minerals produced by the Perma Salt Chamber will be more effective. The cyanuric acid, which works in conjunction with Activate, prevents chlorine loss due to sunlight. Preparate is the initial water preparation treatment, and is a once a year treatment.
Activate: Activate is a combination of DiChlor and Oxone. These two products are the most popular shock treatments available on the market. Activate is the only shock that actually blends these two products for their maximum effectiveness. DiChlor is a very strong, fast acting, but short lived bacteria-stat. By only adding it every 2 weeks, all of the side effects of chlorine use are eliminated. The oxone is an extremely powerful oxidizing agent that strips away chloramines and other contaminants killed by the DiChlor. This blend of DiChlor and Oxone is so effective and powerful, it is only necessary every 2 weeks.
Klairate: Klairate is an enzyme based water clarifier. Enzymes attack and eliminate oils and other contaminants in the water to maintain that perfect HD water clarity. The most common cause of water cloudiness and scum lines on pools is oils, usually from sun blocks and sun tan lotions. The enzyme based Klairate, eats these oils to keep the water’s HD clarity.
*The Perma Salt Chamber must be replaced usually once a year. The service light will come on to indicate that it is time to change the chamber. The Preparate is a once a year treatment, however, it can also be used as a winterizing treatment as well.
The Perma Salt System, by a combination of synergistic technologies, is the only cost effective, every 2 week program with an algae free guarantee on the market today.
The total dissolved solids (TDS) of the water must be at a minimum of 1000 ppm in order for the copper to reach optimal levels. This is done by adding the 25# bucket of Preperate and 1 bag of Activate. If your TDS levels do not reach 1000ppm contact your Local Family Leisure for options on raising your TDS.
Test for copper levels. Your copper level should be maintained between .3 and .5 ppm. Adjust the output levels by turning the control knob up or down. It may take a few days for your copper levels to reach the desired levels.
Every 2 Weeks
- Add 1 bottle of Klairate & 1 Bag of Activate (2 Bags for 30' pools or larger)
- Regulate copper levels by adjusting dial on the Perma Salt System
- Test and adjust pH and Alkalinity as needed
Optimal levels for properly balanced Perma Salt water
- pH 7.2 - 7.8
- Total Alkalinity 80-140ppm
- Calcium Hardness 200-350ppm
- Total Dissolved Solids (TDS) 1000ppm minimum
NOTE: Customers using well water with the Perma Salt System should not use an iron remover. This will counteract with the the copper ions that the Perma Salt System is generating.
HOW TO OPEN YOUR POOL WITH THE PERMA SALT SYSTEM
CLICK HERE For Pool School Notes and Video.
Replacement Once per Year
Indication Illuminated Light
Perma Salt System Family Leisure Exclusive
For online orders over $40 (before tax), shipping and handling is FREE. For online orders under $40, shipping is still FREE, although the standard $6.99 handling fee will be applied to the order. Most pool chemicals and other pool supplies ship via UPS / Fed Ex. Most delivery times within the Continental U.S range from 2-5 days depending on location. All pool supply orders received before noon will ship that SAME DAY.
Shipping Details & Conditions.