Due to high demand, online orders may take an additional 2-3 days to ship.
Hayward 1 HP Pump & Motor by Hayward
product #3401

Hayward 1 HP Pump & Motor

by Hayward
Product Temporarily Unavailable


Request More Info

Free Shipping on Orders Over $40

Product Details

1 HP Pump & Motor  110v by Hayward (For Above Ground Pool Only)

The 1 Horsepower Pump & Motor by Hayward is compatible with Hayward, Jacuzzi, Waterway Sand or Element Above Ground Filter Systems.

Installation Instructions

Pump Location: The Power-Flo LX™ pump MUST be installed below the pool water line (see Figure to right). Self-priming Power-Flo II™ pumps may be installed up to four (4) feet above the pool water line.Install pump on a firm, level base or pad to meet all local and national codes. The field supplied base or pad must be level and vibration-free. Pump motors require free circulation of air for cooling. Do NOT install pump in a damp or non-ventilated location. Though the pump is designed for outdoor use, it is strongly advised to protect the electrical components from the weather. Select a well-drained area, one that will not flood when it rains. 

Pump Mounting - Fasten pump to base or pad with screws or bolts to further reduce vibration and stress on pipe or hose joints. The base
MUST be solid - level - rigid - vibration free. Pump mount must: Allow pump inlet height to be as close to water level as possible. Allow use of short, direct suction pipe (to reduce friction losses). Allow for ball valves in suction and outlet piping. Be protected from excess moisture and flooding. Allow adequate access for servicing pump and piping
Plumbing - Use Teflon tape to seal threaded connections on molded plastic components. All plastic fittings must be new or thoroughly cleaned before use.
NOTE: Do NOT use Plumber’s Pipe Dope as it may cause cracking of the plastic components. When applying Teflon tape to plastic threads, wrap the entire threaded portion of the male fitting with one to two layers of tape. Wind the tape clockwise as you face the open end of the fitting, beginning at the end of the fitting. The pump suction and outlet ports have molded-in thread stops. Do NOT attempt to force hose connector fitting past this stop. It is only necessary to tighten fittings enough to prevent leakage. Tighten fitting by hand and then use a tool to engage fitting an additional 1 ½ turns. Use care when using Teflon tape as friction is reduced considerably; DO NOT over-tighten fitting or you may cause damage. If leaks occur, remove connector, clean off old Teflon tape, rewrap with one to two additional layers of Teflon tape, and re-install connector.
Piping Flexible Hose, PVC, or Reinforced Hose are all acceptable piping methods. For pump outlet use 1-1/2" PVC pipe or reinforced hose. For pump suction on ALL models, use 1-1/2" reinforced hose. Increase size if a long run is needed. For pipe larger than port, use reducing fitting in strainer port. To avoid pump strain, support suction and outlet independently. Place supports near pump. To avoid strain left by a gap at last connection, start all piping at pump and run pipe AWAY from pump. NEVER use suction pipe SMALLER than pump suction connections. Suction pipe inlet must be lower than pump inlet port.



Pump Included

Motor Included

Voltage 110

Compatible See Below

Installation See Below

Horsepower 1

Videos & Resources


Free Shipping

For online orders over $40 (before tax), shipping and handling is FREE. Orders that are under $40 will have a $5.99 shipping fee added. Most pool supplies ship via Fed Ex and delivery times within the Continental U.S range from 2-5 days. All orders received before noon will ship that SAME DAY.
Shipping Details & Conditions.


People Also Buy

$19.99 $13.99

Starting At $9.99

$23.99 $16.99
$34.99 $24.99
$10.99 $7.99


Looking for a price quote or have a question? Let us know here, and we'll call or email you back shortly. Be sure to include any details, including the quantity or specific options you are interested in.

Ready To See More?

Visit our YouTube channel to see more, or stop in to our nearest location.
We're here to make the buying experience simple, hassle-free and worry-free – from selection to installation.